Rust Remover
A light to medium-duty treatment that removes surface rust and corrosion, so steel is clean and ready for Metal Coating.
Why use it
- Removes light to medium surface rust
- Prepares metal for coating
- Pairs with Metal Coating
- Simple brush or wipe application
Where to use it
- Steel parts and fixtures
- Railings and gates
- Equipment
- Trailer frames
Industries
- Marine
- Oil & gas
- Facilities
How to apply
- Wire-brush off any chipping or flaking paint and loose rust.
- Shake, then apply with a pump sprayer or brush.
- Leave it to work for 5 to 10 minutes, depending on the rust. Keep the surface wet the whole time.
- Scrub the rusted area while it is still wet. Do not let the solution dry on the metal.
- Rinse with water and wipe with a clean cloth. Repeat if any rust is left.
- For tools and small parts, soak them for 15 to 30 minutes and scrub if needed.
Specifications
| Type | Rust and corrosion remover |
|---|---|
| Drying time | Allow 1 to 3 hours to dry before coating |
| Category | Metal & corrosion |
| Pack sizes | 20 L (5.3-gallon) pail, in US stock · 1,000 L IBC tote, factory-direct |
| Minimum order | One 20 L pail. Bulk pricing from 500 L, mixed across products. |
| Delivery | 20 L pails: 2 to 5 business days by ground in the contiguous US. Canada and Mexico: timing confirmed at shipment. 1,000 L totes: typically 4 to 6 weeks from the port in Vietnam. |
| Documents | Technical data sheet (TDS) and safety data sheet (SDS) available on request |
Figures from the manufacturer's technical data. Coverage and drying times depend on the surface, temperature and humidity. Always test a small area first.
Rust Remover: common questions
Does it work on heavy rust?
It is made for light to medium surface rust. Heavy rust and pitting need sanding, grinding or a wire wheel.
Can I soak small parts?
Yes. Soak tools and parts for 15 to 30 minutes, then scrub if needed.
When can I coat the metal?
Rinse, wipe and let it dry for 1 to 3 hours, then apply Metal Coating.
Other products
Natural Seal
Algae Guard
XD Bio Cleaner
Metal CoatingNeed Rust Remover for a project?
Call 1-888-815-3370 for pricing, email info@nanocoatingsupply.com or send a quote request.
Product details summarised from ThinTech Coatings. Always follow the technical data sheet.